{"title":"Workshop","description":"","products":[{"product_id":"bench-plane-blade-pouch-full-grain-leather","title":"Bench Plane Blade Pouch – Full Grain Leather","description":"The Leather Blade Pouch is a superior pouch to keep all your sharp plane blades safe.\r\n\r\nDue to separated divisions in the rear pocket the pouch is designed to fit bevel down plane blades, Nos 2, 3, 4, 4 1\/2, 5, 51\/2, 6, 7. Also, Nos 164, 62, 7 1\/2.  There is an extra leather pouch in the front to accommodate smaller or block plane blades.\r\n\r\nWe use our beautiful veg tanned 2.2mm cowhide leather and all brass studs \u0026amp; rivets.\r\n\r\nWe can personalise your blade pouch with your name or initials, just add the information in the ‘note section’ on checkout.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565040562455,"sku":null,"price":69.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/84b9da8e-image-1.png?v=1774903731"},{"product_id":"block-plane-blade-pouch-full-grain-leather","title":"Block Plane Blade Pouch – Full Grain Leather","description":"The Block Plane Blade Pouch is a superior pouch to keep all your block plane blades safe \u0026amp; sharp. Beautiful veg tanned aniline finish cowhide.\r\n\r\nThere are two pockets to take block plane \u0026amp; spokeshave blades. Will # 65, 60 1\/2, 102 \u0026amp; spokeshave blades.\r\n\r\nThe closure is brass Sam Browne studs, easy, strong \u0026amp; fast.\r\n\r\nWe can personalise your blade pouch with your name or initials, just add the information in the ‘note section’ on checkout.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565040759063,"sku":null,"price":39.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/8b9de338-image.jpg?v=1774903731"},{"product_id":"holdfast-boot","title":"Holdfast Boot","description":"These veg tanned 2.2mm cowhide Holdfast Boots are designed to suit our holdfasts. They protect your workpiece from bruising and increase grip.\r\n\r\nMay suit other holdfasts\r\nopening width – 45mm,\r\nsewn end width – 52mm\r\nlength – 47mm","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565040791831,"sku":null,"price":12.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/9123ac34-image-2.png?v=1774903731"},{"product_id":"ray-iles-traditional-crook-knife-large-r-h","title":"Ray Iles Traditional Crook Knife - Large - R\/H","description":"Ray Iles Traditional Crook Knife is made by Ray Iles Edge Tools. The design has considered the shape and size of the handle for comfort and control. The blade is made from excellent \u003cu\u003eO1 high carbon tool steel\u003c\/u\u003e and holds an exceptionally sharp edge. The handle is made from beech and is treated with linseed oil. The handle will require additional coats of linseed oil from time to time to maintain the look and durability of the wood.\r\n\r\nThis is the large version of the traditional crook knives, designed to make larger cuts when starting off or for larger carving projects.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565040988439,"sku":null,"price":89.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/1181df01-IMG_0248-768x768-1.jpg?v=1774903730"},{"product_id":"ray-iles-traditional-crook-knife-small-r-h","title":"Ray Iles Traditional Crook Knife -Small - R\/H","description":"Ray Iles Traditional Crook Knife is made by Ray Iles Edge Tools. The design has considered the shape and size of the handle for comfort and control. The blade is made from excellent \u003cu\u003eO1 high carbon tool steel\u003c\/u\u003e and holds an exceptionally sharp edge. The handle is made from beech and is treated with linseed oil. The handle will require additional coats of linseed oil from time to time to maintain the look and durability of the wood.\r\n\r\nThis is the smaller version of the knife making it best suited to finer work.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565040922903,"sku":"CK003","price":89.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/944eafbb-IMG_0248-768x768-1.jpg?v=1774903730"},{"product_id":"ray-iles-scorp","title":"Ray Iles Scorp","description":"Essentially a curved drawknife, the scorp, or inshave, was originally a cooper's tool. They are now primarily used for hollowing out chair seats. The Ray Iles Scorp is a very solid well made tool.\r\n\r\nMade from \u003cstrong\u003e01 high carbon tool steel,\u003c\/strong\u003e oil hardened, and tempered to approximately 60 RC. The cigar shaped handles are made from air dried beech, treated with linseed oil and finished with brass ferrules.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565041119511,"sku":"Scorp","price":189.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/35836689-IMG_0038-2-scaled-e1598070037405.jpg?v=1774903730"},{"product_id":"henry-eckert-honing-guide","title":"Henry Eckert Honing Guide","description":"Made in Adelaide, the Henry Eckert Honing Guide is in solid cast manganese bronze, marine grade stainless steel \u0026amp; brass. It is based on the design principles of the no longer produced Eclipse guide.\r\n\r\nIt has CNC machined jaws, matched in pairs. The machining is precise resulting in absolutely square edge sharpening. It is super smooth in operation. The reference points ensure the blade or chisel you are sharpening is flat on the stone and square to the rolling bearing. The bearing is 15mm wide to allow weight shifting when honing and hence blade rounding when required but not too narrow to cause unnecessary grooving of the sharpening stone.\r\n\r\nThe tool accommodates all plane blade widths and bevel-edged bench chisel widths.\r\n\r\nWe use only marine grade stainless steel for the threaded rods \u0026amp; bearing to limit the damage the water \/ grit environment it is exposed to can cause. A sintered bronze bush is used inside the stainless bearing to allow smooth operation and resistance to corrosion.\r\nThe upper jaws that accept plane blades are ‘dovetailed’ to ensure the blade is pushed down flat and square. Maximum blade width on the top jaws is 70mm, narrowest 32mm. The lower chisel jaws are the same in reverse, that is, on clamping, the small plane blade or chisel is pushed up flat against the jig to keep it straight and square. The lower chisel jaws have a maximum width of 45mm, narrowest 8mm. We also have a 'middle' clamping position to accommodate thin bench chisels 12mm (1\/2\"+) to 6mm (1\/4\"). The tool accommodates all plane blade widths and bevel-edged bench chisel widths. Some mortise chisels can also be held in the honing guide between the flat sections of the jaws. Clearances allow sharpening from 20° up to 50°. The knurled brass knob is wide giving excellent finger purchase with a screwdriver slot to be used if required.\r\n\r\n\u003cem\u003eThe hand cast process does allow for some casting residual imperfections, it doesn't affect at all the performance or life of the tool, part of the tool's character\u003c\/em\u003e.\r\n\r\nThe tool is solid weighing 340 grams (12 oz).\r\n\r\nWe have always been a great supporter of the simplicity and efficiency of the Eclipse jig, our aim is to make blade sharpening very simple and very successful for the woodworker.\r\n\r\nWe have an \u003ca href=\"https:\/\/henryeckert.com.au\/honing-guide-angle-setting-guide\/\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eAngle Setting\u003c\/span\u003e \u003cspan style=\"color: #0000ff;\"\u003eGuide here\u003c\/span\u003e\u003c\/a\u003e for use with our honing guide.\r\n\r\nMade in Adelaide.\r\n\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/youtu.be\/0qTD1cUSXac\"\u003eProduct Video\u003c\/a\u003e\u003c\/span\u003e\r\n\r\n\u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"https:\/\/henryeckert.com.au\/henry-eckert-sharpening-instructions\/\"\u003eHET Sharpening Instructions\u003c\/a\u003e\u003c\/span\u003e\r\n\r\n\u003ca href=\"https:\/\/henryeckert.com.au\/?page_id=2334\u0026amp;preview=true\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eAustralian Wood Review Tool Review\u003c\/span\u003e\u003c\/a\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565041512727,"sku":null,"price":195.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/c375ccb3-IMG_5196.jpg?v=1774903730"},{"product_id":"honing-guide-angle-setting-jig","title":"Honing Guide \u0026 Angle Setting Jig","description":"Combine the Henry Eckert Honing Guide \u0026amp; Angle Setting Jig to get your woodwork plane blades \u0026amp; chisels super sharp. \u003ca href=\"https:\/\/henryeckert.com.au\/product-category\/sharpening\/shapton-sharpening-systems\/\"\u003eShapton Ceramic Whetstones\u003c\/a\u003e make the perfect partner.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565041611031,"sku":null,"price":239.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/4073313a-Angle-Setting-Jig-scaled-1.jpg?v=1774903730"},{"product_id":"henry-eckert-angle-setting-jig","title":"Henry Eckert Angle Setting Jig","description":"The Henry Eckert Angle Setting Jig is made by CNC router from long lasting HDPE.\r\n\r\n\u003cem\u003eIt is designed to exclusively partner the Henry Eckert Honing Guide.\u003c\/em\u003e There are 11 setting angles from 20° to 50° for both plane blades and chisels. It can be used flat on the bench, in one hand or set to the edge of your bench with 2 dowels on the underside.\r\n\r\nMade in Adelaide\r\n\r\n[caption id=\"attachment_1389\" align=\"alignnone\" width=\"177\"]\u003ca href=\"\/2017\/08\/HET-Sharpening-Instructions.pdf\"\u003e\u003cimg class=\"wp-image-1389\" src=\"\/2017\/09\/FullSizeRender-99-300x300.jpg\" alt=\"\" width=\"177\" height=\"177\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/henryeckert.com.au\/henry-eckert-sharpening-instructions\/\"\u003eClick here for HET Sharpening Instructions.\u003c\/a\u003e[\/caption]\r\n\r\n ","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565041643799,"sku":null,"price":49.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/01acc4fe-IMG_4481-scaled-1.jpg?v=1774903730"},{"product_id":"split-leather-suede-hand-scraper-pouch","title":"Split Leather Suede Hand Scraper Pouch","description":"Our Leather Hand Scraper Pouch, when closed, is 130mm tall \u0026amp; 100mm wide.  It is a universal size to accommodate most hand scrapers. It has stud closure \u0026amp; rivet reinforcement.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565041742103,"sku":null,"price":34.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/d01d5c87-image-25.jpg?v=1774903730"},{"product_id":"henry-eckert-marking-gauge-pencil-attachment","title":"Henry Eckert Marking Gauge - Pencil Attachment","description":"Milled from solid brass the Henry Eckert Marking Gauge Pencil Attachment turns your HE Marking Gauge into a Pencil Gauge.\r\nSimply remove the marking blade and slide the Pencil Attachment over the end of the stainless steel rod. Secure with the thumbscrew, insert the pencil (wooden or mechanical) and secure with the second stainless thumbscrew.\r\nThe pencil attachment can rotate around the shaft so the pencil can mark at the angle you wish.\r\nPencil included. (Mechanical pencils \u003ca href=\"https:\/\/henryeckert.com.au\/product-category\/accessories\/henry-eckert-stationery\/pentel-mechanical-pencils-accessories\/\"\u003ehere\u003c\/a\u003e).\r\nMade in Adelaide.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042135319,"sku":null,"price":29.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/7d1c7b85-FullSizeRender-117-1024x1024-600x600-1.jpg?v=1774903730"},{"product_id":"henry-eckert-marking-gauge-regular","title":"Henry Eckert Marking Gauge - Regular","description":"The Henry Eckert Marking Gauge - Regular is our simplest gauge. It is the same as our other gauge except it does not have Micro Adjust. To set this gauge you simply slide the rod through the fence to where the blades (s) or pencil needs to be and then lock it down with the single stainless steel thumbscrew. The solid feel and heft of the tool ensures your blade stays on track for the perfect straight line. You are in control. The fence is figured Mana Gum and brass wear insert, the rod is marine grade stainless steel and the blade is our PM-10V Powdered Metallurgy Tool Steel. The fence is 90mm wide, 57mm high \u0026amp; around 22mm thick. The rod is 230mm long.\r\n\r\nAccessories transform the Henry Eckert Marking\/Cutting  Gauge into a Pencil Gauge, Mortise Gauge, Panel Gauge, Beam Compass and Trammel Gauge.\r\nMade in Adelaide, South Australia.\r\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=AlyIj2iLvdE\u0026amp;t=4s\"\u003e\u003cimg class=\"alignnone wp-image-5130\" src=\"https:\/\/henryeckert.com.au\/wp-content\/uploads\/2017\/10\/hqdefault-300x168.jpg\" alt=\"\" width=\"300\" height=\"168\"\u003e\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=AlyIj2iLvdE\u0026amp;t=4s\"\u003eMarking Gauge System video\u003c\/a\u003e.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042168087,"sku":null,"price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/721cf0e5-FullSizeRender-110-1024x1024-600x600-1.jpg?v=1774903730"},{"product_id":"henry-eckert-marking-gauge-rod-extension-150mm","title":"Henry Eckert Marking Gauge - Rod Extension - 150mm","description":"The Rod Extension turns your HE Marking Gauge into a Panel Gauge. It comes in 2 sizes, 150mm \u0026amp; 235mm. In stainless steel,  it also has a stainless steel thread to connect to your marking gauge rod. The other end is threaded internally to take the marking blade screw.\r\nAlternatively to the marking blade fitment, you can also fit the HE Pencil Attachment if required.\r\nMade in Adelaide.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042102551,"sku":null,"price":33.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"henry-eckert-marking-gauge-rod-extension-235mm","title":"Henry Eckert Marking Gauge - Rod Extension - 235mm","description":"The Rod Extension turns your HE Marking Gauge into a Panel Gauge. It is 235mm long. In stainless steel,  it also has a stainless steel thread to connect to your marking gauge rod. The other end is threaded internally to take the marking blade screw.\r\nAlternatively to the marking blade fitment, you can also fit the HE Pencil Attachment if required.\r\nMade in Adelaide.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042233623,"sku":null,"price":39.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/ab8f5a70-FullSizeRender-119-768x768-1.jpg?v=1774903730"},{"product_id":"henry-eckert-trammel-gauge","title":"Henry Eckert Trammel Gauge","description":"The Henry Eckert Trammel Gauge consists of two Trammel Heads and the 235mm rod from the HE Marking Gauge giving you a maximum span of 220mm between the trammel points. If you wish to make the trammel gauge longer you can add one or more 235mm extension rods which can be purchased separately. The extension rods have a stainless steel thread on one end enabling you to simply screw the rods together.\r\n\r\nIf you wish to turn your trammel gauge into a beam compass you can remove one trammel head and screw in an HE Marking Blade or fit an HE  Pencil Attachment.\r\n\r\nAll components from the Henry Eckert Marking Gauge System are Made in Adelaide.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042266391,"sku":null,"price":94.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/4da2e6ac-FullSizeRender-122-768x768-1.jpg?v=1774903730"},{"product_id":"henry-eckert-marking-gauge-mortise-blade-set-of-four","title":"Henry Eckert Marking Gauge Mortise Blade - Set of Four","description":"We haver four sizes of mortise blades - 3mm, 6mm, 9mm \u0026amp; 12mm.\r\n\r\nYou can purchase the full set of four here.\r\n\r\nThey are machined from our PM-10V Powdered Metallurgy Tool Steel giving toughness and amazing anti-abrasive qualities resulting in blades that remains sharp for a long time, more than twice as long as A2 tool steel.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042200855,"sku":null,"price":99.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"henry-eckert-trammel-head","title":"Henry Eckert Trammel Head","description":"The Henry Eckert Trammel Head is milled from Manganese Bronze which is much harder than brass so it enables it to maintain a very sharp pivot point. It is designed to work with the Henry Eckert Marking Gauge System to create a Beam Compass or Trammel Gauge.\r\nIt is fitted and secured by a stainless steel thumbscrew to the marking gauge rod. The other end then has a marking blade or pencil attachment fitted to make a beam compass. The beam compass can be extended with a rod extension.\r\n\r\nIf two Trammel Heads are used on the stainless rod a Trammel Gauge is created.\r\n\r\nMade in Adelaide.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042397463,"sku":null,"price":29.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/b7a8a4d3-FullSizeRender-121-768x768-1.jpg?v=1774903730"},{"product_id":"he-marking-gauge-system-the-works","title":"HE Marking Gauge System - The Works","description":"In the Storage Box:\r\n\u003cul\u003e\r\n \t\u003cli\u003eHenry Eckert Marking Gauge - Micro Adjust\u003c\/li\u003e\r\n \t\u003cli\u003ePencil Attachment incl Pencil\u003c\/li\u003e\r\n \t\u003cli\u003e2 x Trammel Heads\u003c\/li\u003e\r\n \t\u003cli\u003e4 sizes of Mortise Blades\u003c\/li\u003e\r\n \t\u003cli\u003eSpare marking blade\u003c\/li\u003e\r\n \t\u003cli\u003e235mm rod extension x 2\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nMade in Adelaide, South Australia.\r\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=AlyIj2iLvdE\u0026amp;t=4s\"\u003e\u003cimg class=\"alignnone size-medium wp-image-5130\" src=\"https:\/\/henryeckert.com.au\/wp-content\/uploads\/2017\/10\/hqdefault-300x168.jpg\" alt=\"\" width=\"300\" height=\"168\"\u003e\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=AlyIj2iLvdE\u0026amp;t=4s\"\u003eMarking Gauge System video.\u003c\/a\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042331927,"sku":null,"price":489.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"henry-eckert-marking-gauge-blade","title":"Henry Eckert Marking Gauge Blade","description":"The blades for our marking gauges are machined from our PM-10V Powdered Metallurgy Tool steel giving toughness and amazing anti-abrasive qualities resulting in a blade that remains sharp for a long time, more than twice as long as O1 or A2 tool steel. They can very easily be sharpened by rubbing the flat face on a flat sharpening stone when required.\r\nMade in Adelaide.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042364695,"sku":null,"price":29.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/07073311-IMG_0345-1024x1024-600x600-1.jpg?v=1774903730"},{"product_id":"henry-eckert-marking-gauge-micro-adjust-panel-gauge-kit","title":"Henry Eckert Marking Gauge - Micro Adjust - Panel Gauge Kit","description":"The Micro Adjust Panel Gauge Kit is an extension of the full HE Marking Gauge - Micro Adjust. It is based on that gauge and hence has Micro Adjust.\r\n\r\nWhen required, it gives you the ability to change your Marking Gauge - Micro Adjust into a Panel Gauge by screwing in rod extensions. It also has a Pencil Attachment should you require a pencil rather than the cutting wheel which comes as standard with the Marking Gauge - Micro Adjust.\r\n\r\nIn the Storage Box:\r\n\r\n1 x HE Marking Gauge - Micro Adjust\r\n2 x HE 235mm Rod Extension\r\n1 x HE Pencil Attachment incl. pencil","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042299159,"sku":null,"price":309.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"he-marking-gauge-regular-panel-gauge-kit","title":"HE Marking Gauge - Regular - Panel Gauge Kit","description":"The Regular Panel Gauge Kit is an extension of the full HE Marking Gauge - Regular. It is based on that gauge and hence does not have Micro Adjust.\r\n\r\nWhen required, it gives you the ability to change your Marking Gauge - Regular into a Panel Gauge by screwing in rod extensions. It also has a Pencil Attachment should you require a pencil rather than the cutting wheel which comes with the Marking Gauge - Regular as standard.\r\n\r\nIn the Storage Box:\r\n\r\n1 x HE Marking Gauge - Regular\r\n2 x HE 235mm Rod Extensions\r\n1 x HE Pencil Attachment incl. pencil","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042430231,"sku":null,"price":259.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/54aab873-FullSizeRender-110-1024x1024-600x600-1.jpg?v=1774903730"},{"product_id":"pm-10v-blade-suits-no-62-no-164-50-micro-bevel","title":"PM-10V blade suits No 62 \u0026 No 164 - 50° Micro Bevel","description":"This PM-10V plane blade is made to suit the Henry Eckert Low Angle Jack Plane. At 4.8mm the blade is thicker than normal.\r\n\r\nThe major bevel is ground at 25°, we have installed a \u003cstrong\u003e50° micro bevel\u003c\/strong\u003e to help avoid tear out in cross grained timbers.\r\n\r\n\u003cem\u003ePowdered Metallurgy\r\n\u003c\/em\u003e\r\n\r\nPowdered Metallurgy Tool Steel is the new era of tool steel. The steel ‘mix’ contains high vanadium carbides. It comes from a process of melting the constituent metals that make up the steel and then mixing them together. Next, they are atomised to make a powder consisting of minutely small particles.\r\nThe particles are screened to ensure uniformity and then under pressure they are heated to form the tool steel billet.\r\nThis method produces a tool steel that is extremely uniform with a very fine grained structure.\r\nWhat does this mean to the woodworker?\r\nPut simply, this tool steel has higher impact resistance than O1 \u0026amp; A2 tool steel. More importantly it has amazing resistance to abrasion, that is, great wear resistance so your blades stay sharper much longer. Users say over double the time of O1 \u0026amp; A2 steel.\r\nThe blades sharpen easily to a very keen edge. Our blades are machined, carefully heat treated to the manufacturing mill’s specifications by our metallurgist (Andrew), surface ground flat and primary bevels prepared for fine honing in Adelaide.Depending on the size, our after market blades are 10% to 30% thicker than the originals giving you a more rigid blade resisting chatter and more weight (heft) in the right spot lowering the centre of gravity.\r\n\r\n\u003cem\u003e Technical Powdered Metallurgy Information Page \u003ca href=\"https:\/\/henryeckert.com.au\/powdered-metallurgy-tool-steel-information-page\/\"\u003ehere\u003c\/a\u003e.\u003c\/em\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042462999,"sku":null,"price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/26f8f54f-IMG_0190-768x768-1.jpg?v=1774903730"},{"product_id":"pm-10v-blade-suits-no-62-no-164-35-micro-bevel","title":"PM-10V blade suits No 62 \u0026 No 164 - 35° Micro Bevel","description":"This PM-10V plane blade is made to suit the Henry Eckert Low Angle Jack Plane. At 4.8mm the blade is thicker than normal.\r\n\r\nThe major bevel is ground at 25°, we have installed a \u003cstrong\u003e35° micro bevel\u003c\/strong\u003e for general use.\r\n\r\n\u003cem\u003ePowdered Metallurgy\r\n\u003c\/em\u003e\r\n\r\nPowdered Metallurgy Tool Steel is the new era of tool steel. The steel ‘mix’ contains high vanadium carbides. It comes from a process of melting the constituent metals that make up the steel and then mixing them together. Next, they are atomised to make a powder consisting of minutely small particles.\r\nThe particles are screened to ensure uniformity and then under pressure they are heated to form the tool steel billet.\r\nThis method produces a tool steel that is extremely uniform with a very fine grained structure.\r\nWhat does this mean to the woodworker?\r\nPut simply, this tool steel has higher impact resistance than O1 \u0026amp; A2 tool steel. More importantly it has amazing resistance to abrasion, that is, great wear resistance so your blades stay sharper much longer. Users say over double the time of O1 \u0026amp; A2 steel.\r\nThe blades sharpen easily to a very keen edge. Our blades are machined, carefully heat treated to the manufacturing mill’s specifications by our metallurgist (Andrew), surface ground flat and primary bevels prepared for fine honing in Adelaide.Depending on the size, our after market blades are 10% to 30% thicker than the originals giving you a more rigid blade resisting chatter and more weight (heft) in the right spot lowering the centre of gravity.\r\n\r\n\u003cem\u003e Technical Powdered Metallurgy Information Page \u003ca href=\"https:\/\/henryeckert.com.au\/powdered-metallurgy-tool-steel-information-page\/\"\u003ehere\u003c\/a\u003e.\u003c\/em\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042594071,"sku":null,"price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/c74a8607-IMG_0190-768x768-1.jpg?v=1774903730"},{"product_id":"pm-10v-blade-no-60-1-2-block-plane-35-micro-bevel","title":"PM-10V blade  No 60 1\/2 Block Plane - 35° Micro Bevel","description":"This PM-10V plane blade is made to suit our 60 1\/2  Block Plane.\r\n\r\nThe major bevel is ground at 25°, we have installed a 35 degree micro bevel for genreral use.\r\n\r\n\u003cem\u003ePowdered Metallurgy\r\n\u003c\/em\u003e\r\n\r\nPowdered Metallurgy Tool Steel is the new era of tool steel. The steel ‘mix’ contains high vanadium carbides. It comes from a process of melting the constituent metals that make up the steel and then mixing them together. Next, they are atomised to make a powder consisting of minutely small particles.\r\nThe particles are screened to ensure uniformity and then under pressure they are heated to form the tool steel billet.\r\nThis method produces a tool steel that is extremely uniform with a very fine grained structure.\r\nWhat does this mean to the woodworker?\r\nPut simply, this tool steel has higher impact resistance than O1 \u0026amp; A2 tool steel. More importantly it has amazing resistance to abrasion, that is, great wear resistance so your blades stay sharper much longer. Users say over double the time of O1 \u0026amp; A2 steel.\r\nThe blades sharpen easily to a very keen edge. Our blades are machined, carefully heat treated to the manufacturing mill’s specifications by our metallurgist , surface ground flat and primary bevels prepared for fine honing in Adelaide. Depending on the size, our after market blades are 10% to 30% thicker than the originals giving you a more rigid blade resisting chatter and more weight (heft) in the right spot lowering the centre of gravity.\r\n\r\n\u003cem\u003e Technical Powdered Metallurgy Information Page \u003ca href=\"https:\/\/henryeckert.com.au\/powdered-metallurgy-tool-steel-information-page\/\"\u003ehere\u003c\/a\u003e.\u003c\/em\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042561303,"sku":null,"price":94.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/ddb1cf5b-IMG_0400-1024x1024-600x600-1.jpg?v=1774903730"},{"product_id":"pm-10v-blade-no-60-1-2-block-plane","title":"PM-10V blade No 60 1\/2 Block Plane","description":"This PM-10V plane blade is made to suit our No 60 1\/2  Block Plane.\r\n\r\nThe bevel is ground at 25°, it is sharp now but will respond well to a hone. We suggest installing a micro bevel at 30° or 35° for general use.\r\n\r\n\u003cem\u003ePowdered Metallurgy\r\n\u003c\/em\u003e\r\n\r\nPowdered Metallurgy Tool Steel is the new era of tool steel. The steel ‘mix’ contains high vanadium carbides. It comes from a process of melting the constituent metals that make up the steel and then mixing them together. Next, they are atomised to make a powder consisting of minutely small particles.\r\nThe particles are screened to ensure uniformity and then under pressure they are heated to form the tool steel billet.\r\nThis method produces a tool steel that is extremely uniform with a very fine grained structure.\r\nWhat does this mean to the woodworker?\r\nPut simply, this tool steel has higher impact resistance than O1 \u0026amp; A2 tool steel. More importantly it has amazing resistance to abrasion, that is, great wear resistance so your blades stay sharper much longer. Users say over double the time of O1 \u0026amp; A2 steel.\r\nThe blades sharpen easily to a very keen edge. Our blades are machined, carefully heat treated to the manufacturing mill’s specifications by our metallurgist (Andrew), surface ground flat and primary bevels prepared for fine honing in Adelaide.Depending on the size, our after market blades are 10% to 30% thicker than the originals giving you a more rigid blade resisting chatter and more weight (heft) in the right spot lowering the centre of gravity.\r\n\r\n\u003cem\u003e Technical Powdered Metallurgy Information Page \u003ca href=\"https:\/\/henryeckert.com.au\/powdered-metallurgy-tool-steel-information-page\/\"\u003ehere\u003c\/a\u003e.\u003c\/em\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042626839,"sku":null,"price":94.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/3a4a9d35-IMG_0400-1024x1024-600x600-1.jpg?v=1774903730"},{"product_id":"arno-forged-drawknife-flat-150mm","title":"Arno Forged Drawknife - Flat - 150mm","description":"Arno forged drawknives have been used by woodworkers worldwide for many years. They are hand made in France. The blade is forged from high carbon steel.\r\n\r\nThe flat drawknives are now machine ground on both sides to produce arguably the sharpest out of box drawknife available.\r\n\r\nThe underside back bevel is flattened  and slightly angled away from the flat of the body of the tool which ensures easy sharpening access.\r\n\r\nThe red beech handles are turned and then  secured with full length rivets.\r\n\r\nThe tool takes \u0026amp; maintains a sharp edge and will perform rough stock removal as well as fine delicate shaving. It comes with a nice robust leather sheath to protect the blade ( and you) when not in use.\r\n\r\nBlade length - 145mm (6\"), Flat form, Blade width - 32mm, Overall length - 340mm","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043740951,"sku":null,"price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/7b34ff8d-19S0226_56__23884__95382.jpg?v=1774903730"},{"product_id":"pm-10v-blade-no-60-1-2-block-plane-50-micro-bevel","title":"PM-10V blade No 60 1\/2 Block Plane - 50° Micro Bevel","description":"This blade suits our Low Angle Block Plane, No 60 1\/2.\r\n\r\nThe major bevel is ground at 25°, we have installed a 50° micro bevel to assist with tear out with cross grained timbers.\r\n\r\n\u003cem\u003ePowdered Metallurgy\r\n\u003c\/em\u003e\r\n\r\nPowdered Metallurgy Tool Steel is the new era of tool steel. The steel ‘mix’ contains high vanadium carbides. It comes from a process of melting the constituent metals that make up the steel and then mixing them together. Next, they are atomised to make a powder consisting of minutely small particles.\r\nThe particles are screened to ensure uniformity and then under pressure they are heated to form the tool steel billet.\r\nThis method produces a tool steel that is extremely uniform with a very fine grained structure.\r\nWhat does this mean to the woodworker?\r\nPut simply, this tool steel has higher impact resistance than O1 \u0026amp; A2 tool steel. More importantly it has amazing resistance to abrasion, that is, great wear resistance so your blades stay sharper much longer. Users say over double the time of O1 \u0026amp; A2 steel.\r\nThe blades sharpen easily to a very keen edge. Our blades are machined, carefully heat treated to the manufacturing mill’s specifications by our metallurgist (Andrew), surface ground flat and primary bevels prepared for fine honing in Adelaide.Depending on the size, our after market blades are 10% to 30% thicker than the originals giving you a more rigid blade resisting chatter and more weight (heft) in the right spot lowering the centre of gravity.\r\n\r\n\u003cem\u003e Technical Powdered Metallurgy Information Page \u003ca href=\"https:\/\/henryeckert.com.au\/powdered-metallurgy-tool-steel-information-page\/\"\u003ehere\u003c\/a\u003e.\u003c\/em\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042659607,"sku":null,"price":94.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/b1b58c92-IMG_0400-1024x1024-600x600-1.jpg?v=1774903730"},{"product_id":"arno-forged-drawknife-flat-250mm-10","title":"Arno Forged Drawknife - Flat - 250mm ( 10\")","description":"Arno drawknives have been used by woodworkers worldwide for many years. They are hand made in France. The blade is forged from high carbon steel.\r\n\r\nThe flat drawknives are now machine ground on both sides to produce arguably the sharpest out of box drawknife available.\r\n\r\nThe underside back bevel is flattened  and slightly angled away from the flat of the body of the tool which ensures easy sharpening access.\r\n\r\nThe red beech handles are turned and then  secured with full length rivets.The tool takes a sharp edge and will perform rough stock removal as well as fine delicate shaving. It comes with a nice robust leather sheath to protect the blade ( and you) when not in use.\r\n\r\nBlade length - 250mm, Flat form, Blade width - 32mm","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042495767,"sku":null,"price":179.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"arno-forged-drawknives-150mm6-blades-set-of-3","title":"Arno Forged Drawknives - 150mm(6\") Blades - Set of 3","description":"Arno drawknives have been used by woodworkers worldwide for many years. They are hand made in France. The blade is forged from high carbon steel.\r\n\r\nThe flat drawknives are now machine ground on both sides to produce arguably the sharpest out of box drawknife available.\r\n\r\nThe underside back bevel is flattened  and slightly angled away from the flat of the body of the tool which ensures easy sharpening access.\r\n\r\nThe red beech handles are turned and then  secured with full length rivets.\r\n\r\nThe tool takes a sharp edge and will perform rough stock removal as well as fine delicate shaving. It comes with a nice robust leather sheath to protect the blade ( and you) when not in use.\r\n\r\n\u003cem\u003eThis is a set of three with flat, convex \u0026amp; concave forms, a great drawknife arsenal giving you all the flexibility you will ever need.\u003c\/em\u003e\r\n\r\nBlade lengths - 145mm, Flat, Convex \u0026amp; Concave forms, Blade widths - 32mm, Overall lengths - 340mm","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042692375,"sku":null,"price":369.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/c2bff515-19S0226_56__23884__95382.jpg?v=1774903730"},{"product_id":"henry-eckert-marking-gauge-micro-adjust","title":"Henry Eckert Marking Gauge - Micro Adjust","description":"The Henry Eckert Marking Gauge - Micro Adjust has all the features of our Regular gauge except for  the addition of Micro Adjust. You simply slide the rod through the fence until the blade (s) or pencil is approximately in the right spot and  lock the thumbscrew furtherest from the fence, adjust and fine tune the setting with the brass knurled barrel then lock it down with the second stainless thumbscrew. Each 1\/4 turn of the knurled barrel is a 1\/4 mm movement in length, full turn is 1 mm movement, very precise. There are two fine lines etched on the top to give you a guide of how far you have moved the length.\r\nThe solid feel and heft of the tool ensures your blade stays on track for the perfect straight line. You are in control. The fence is in figured Mana Gum \u0026amp; brass, the rod is marine grade stainless steel, blade is our PM-10V Powdered Metallurgy Tool Steel. When drawn back, the blade nestles neatly into the fence for protection.\r\nThe fence is 90mm wide, 57mm high \u0026amp; around 22mm thick. The shaft is 230mm long.\r\nIs delivered in a solid 1400 Fibreboard box with a six compartment segmented tray for accessories.\r\n\r\nSystem accessories (purchased separately or in kits) can transform the Henry Eckert Marking\/Cutting  Gauge into a Pencil Gauge, Mortise Gauge, Panel Gauge, Beam Compass or Trammel Gauge.\r\nMade in Adelaide.\r\n\r\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=AlyIj2iLvdE\u0026amp;t=4s\"\u003e\u003cimg class=\"alignnone size-medium wp-image-5130\" src=\"https:\/\/henryeckert.com.au\/wp-content\/uploads\/2017\/10\/hqdefault-300x168.jpg\" alt=\"\" width=\"300\" height=\"168\"\u003e\u003c\/a\u003e\r\n\u003ca href=\"https:\/\/www.youtube.com\/watch?v=AlyIj2iLvdE\u0026amp;t=4s\"\u003eMarking Gauge System video\u003c\/a\u003e\r\n\r\n ","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042823447,"sku":null,"price":269.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/28b99572-FullSizeRender-113-1024x1024-600x600-1.jpg?v=1774903730"},{"product_id":"no-62-low-angle-jack-plane-fiddleback-red-gum","title":"No 62 Low Angle Jack Plane - Fiddleback Red Gum","description":"\u003cstrong\u003eCurrently unavailable, we will advise when available again.\u003c\/strong\u003e\r\n\r\nThe Henry Eckert Low Angle Jack Plane plane is based on the USA produced Stanley #62.\r\n\r\nWe believe it is the highest performing production Low Angle Jack available.\r\n\r\nWe have used the best components available. The body is stressed relieved, locally cast, ductile iron and is precision surface ground flat giving accurate 90 degree sides.\r\n\r\nFlatness - We metrology measure our tools for flatness. This tool is measured in 400 points across the sole. Average variance is .00047\" or 12 microns (1000 microns in a single millimetre). The tool's sole is dead flat.\r\n\r\nSquareness - The tool is metrology measured on both sides with an average variance of .00017\" or 5 microns. The tool's sides are dead square to the sole.\r\n\r\nIt weighs a hefty 2.6 kgs (5.7 lbs), around the same as a 'modern' No.5 bevel down standard 'Stanley Bedrock copy' bench plane. It is the traditional length 357mm, and 64mm wide.\r\nThe exceptional PM-10V tool steel blade is the thickest around for a No 62 (4.85mm), 50mm (2 inch) wide, 25° bevel with a \u003ca href=\"https:\/\/henryeckert.com.au\/product-category\/the-toolworks\/howard-adjusters\/\"\u003eHoward Adjuster\u003c\/a\u003e as standard. It sits on a precision machined 12 degree bed.\r\nThe cap iron is hand cast manganese bronze. We manufactured the thumbscrews and fittings from solid brass.\r\nIt has a precision machined adjustable mouth allowing the finest gossamer shaving or a thicker shaving for quick stock removal.\r\n\r\nHandles are offered in Fiddleback Red Gum  \u0026amp; Huon Pine. The Fiddleback Red Gum comes from a massive tree in the north of South Australia. The timber from the tree is riddled with fiddleback but the lengths are short, just right for plane handles. Our Huon Pine choice (it is not a pine btw) is simply our homage to this famous timber indigenous to Australia, its Tasmanian history is incredible. Overtime the timber will turn a deep golden honey colour.\r\nThe rear tote handle has enough height to ensure all four fingers sit comfortably. The handle and knob suits both small and large hands due to calculated thicknesses..\r\n\r\n\u003cem\u003eThe weight is down low in the body, lowering the centre of gravity and increasing the heft and planing power of the tool.\u003c\/em\u003e The side walls have more area to assist shooting board stability.\r\n\r\nA Hot Dog handle makes shooting board applications more comfortable.\r\n\r\nCraftsmen, carpenters \u0026amp; woodworkers determined the basic design elements of this tool mostly prior to the time Stanley manufactured the plane from 1905 - 1942. Today it is arguably the most versatile and effective hand plane available. Changing blade cutting angles or blade types makes it a smoother, a jointer for shorter workpieces, a shooting board plane, a tool for hogging out rough sawn timber, a scraper and more.\r\n\r\nhttps:\/\/henryeckert.com.au\/customer-letter-replying-to-our-no-62-post-1-3-2023\/","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042888983,"sku":null,"price":595.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/546108c0-IMG_0168-1-scaled-1.jpg?v=1774903730"},{"product_id":"scraper-blade-90-bevel-no-62-low-angle-jack-plane","title":"Scraper Blade, 90° Bevel No 62 Low Angle Jack Plane","description":"This PM-10V scraper plane blade is made to suit the Henry Eckert Low Angle Jack Plane. At 4.8mm the blade is thick than normal.\r\n\r\nThe bevel is ground at 90 degrees so your plane can be used as a scraper.\r\n\r\n\u003cem\u003ePowdered Metallurgy\r\n\u003c\/em\u003e\r\n\r\nPowdered Metallurgy Tool Steel is the new era of tool steel. The steel ‘mix’ contains high vanadium carbides. It comes from a process of melting the constituent metals that make up the steel and then mixing them together. Next, they are atomised to make a powder consisting of minutely small particles.\r\nThe particles are screened to ensure uniformity and then under pressure they are heated to form the tool steel billet.\r\nThis method produces a tool steel that is extremely uniform with a very fine grained structure.\r\nWhat does this mean to the woodworker?\r\nPut simply, this tool steel has higher impact resistance than O1 \u0026amp; A2 tool steel. More importantly it has amazing resistance to abrasion, that is, great wear resistance so your blades stay sharper much longer. Users say over double the time of O1 \u0026amp; A2 steel.\r\nThe blades sharpen easily to a very keen edge. Our blades are machined, carefully heat treated to the manufacturing mill’s specifications by our metallurgist (Andrew), surface ground flat and primary bevels prepared for fine honing in Adelaide.\r\n\r\nTechnical Powdered Metallurgy Information Page \u003ca href=\"https:\/\/henryeckert.com.au\/powdered-metallurgy-tool-steel-information-page\/\"\u003ehere\u003c\/a\u003e.\r\n\r\n\u003cem\u003e \u003c\/em\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042725143,"sku":null,"price":129.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/970aafe5-IMG_0185-scaled-1.jpg?v=1774903730"},{"product_id":"plane-sock-large","title":"Plane Sock - Large","description":"Our plane socks are knitted in the US by a manufacturer that specialises in protective products for firearms, tools, sporting goods. They are environmentally safe, shield against dust and scratches, and have a lifetime guarantee. In addition to that, the unique makeup of their fabric creates a natural wicking ability that prevents rust and other moisture damage like no other protective product on the market.\r\n\r\nThey come in three sizes, Small suits block planes, Medium for No 4, 164 \u0026amp; 4 1\/2 smoothers, Large suits No 62, No 5 \u0026amp; 6 bench planes.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042790679,"sku":null,"price":23.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/ad73126e-IMG_0065-scaled-1.jpg?v=1774903730"},{"product_id":"low-angle-jack-plane-blade-set","title":"Low Angle Jack Plane Blade Set","description":"The set includes three PM-10V blades, a 35 degree \u003cstrong\u003eor\u003c\/strong\u003e 50 degree blade, a toothed blade and a 90 degree scraper blade. All three blades come in separate leather pouches.\r\n\r\n\u003cem\u003eNB. Put which micro bevel you would like , 35 degrees or 50 degrees, in the note section when you order.\u003c\/em\u003e\r\n\r\n \r\n\r\n ","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042757911,"sku":null,"price":259.0,"currency_code":"AUD","in_stock":true}]},{"product_id":"toothed-blade-to-suit-no-62-low-angle-jack-plane","title":"Toothed Blade, to suit No 62 Low Angle Jack Plane","description":"This PM-10V toothed plane blade is made to suit the Henry Eckert Low Angle Jack Plane. At 4.8mm the blade is thicker than normal.\r\n\r\nThe bevel is ground at 25 degrees with chisel like teeth so your plane can be used for heavy stock removal on rough sawn or very uneven timber. You could put a secondary 30 degree bevel or higher on the blade to suit the timber you are planing.\r\n\r\n\u003cem\u003ePowdered Metallurgy\r\n\u003c\/em\u003e\r\n\r\nPowdered Metallurgy Tool Steel is the new era of tool steel. The steel ‘mix’ contains high vanadium carbides. It comes from a process of melting the constituent metals that make up the steel and then mixing them together. Next, they are atomised to make a powder consisting of minutely small particles.\r\nThe particles are screened to ensure uniformity and then under pressure they are heated to form the tool steel billet.\r\nThis method produces a tool steel that is extremely uniform with a very fine grained structure.\r\nWhat does this mean to the woodworker?\r\nPut simply, this tool steel has higher impact resistance than O1 \u0026amp; A2 tool steel. More importantly it has amazing resistance to abrasion, that is, great wear resistance so your blades stay sharper much longer. Users say over double the time of O1 \u0026amp; A2 steel.\r\nThe blades sharpen easily to a very keen edge. Our blades are machined, carefully heat treated to the manufacturing mill’s specifications by our metallurgist (Andrew), surface ground flat and primary bevels prepared for fine honing in Adelaide.\r\n\r\nTechnical Powdered Metallurgy Information Page \u003ca href=\"https:\/\/henryeckert.com.au\/powdered-metallurgy-tool-steel-information-page\/\"\u003ehere\u003c\/a\u003e.\r\n\r\n\u003cem\u003e \u003c\/em\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042954519,"sku":null,"price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/a1f27a04-IMG_0182-scaled-1.jpg?v=1774903730"},{"product_id":"pm-10v-blade-suits-no-62-no-164","title":"PM-10V blade suits No 62 \u0026 No 164","description":"This PM-10V plane blade is made to suit the Henry Eckert Low Angle Jack Plane. At 4.8mm the blade is thicker than normal.\r\n\r\nThe bevel is ground at 25°, it is sharp now but will respond well to a hone. We suggest installing a micro bevel at 30° or 35° for general use.\r\n\r\n\u003cem\u003ePowdered Metallurgy\r\n\u003c\/em\u003e\r\n\r\nPowdered Metallurgy Tool Steel is the new era of tool steel. The steel ‘mix’ contains high vanadium carbides. It comes from a process of melting the constituent metals that make up the steel and then mixing them together. Next, they are atomised to make a powder consisting of minutely small particles.\r\nThe particles are screened to ensure uniformity and then under pressure they are heated to form the tool steel billet.\r\nThis method produces a tool steel that is extremely uniform with a very fine grained structure.\r\nWhat does this mean to the woodworker?\r\nPut simply, this tool steel has higher impact resistance than O1 \u0026amp; A2 tool steel. More importantly it has amazing resistance to abrasion, that is, great wear resistance so your blades stay sharper much longer. Users say over double the time of O1 \u0026amp; A2 steel.\r\nThe blades sharpen easily to a very keen edge. Our blades are machined, carefully heat treated to the manufacturing mill’s specifications by our metallurgist (Andrew), surface ground flat and primary bevels prepared for fine honing in Adelaide.Depending on the size, our after market blades are 10% to 30% thicker than the originals giving you a more rigid blade resisting chatter and more weight (heft) in the right spot lowering the centre of gravity.\r\n\r\nTechnical Powdered Metallurgy Information Page \u003ca href=\"https:\/\/henryeckert.com.au\/powdered-metallurgy-tool-steel-information-page\/\"\u003ehere\u003c\/a\u003e.\r\n\r\n\u003cem\u003e \u003c\/em\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043052823,"sku":null,"price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/5a42a12a-IMG_0190-768x768-1.jpg?v=1774903730"},{"product_id":"no-62-hot-dog","title":"No 62 - Hot Dog","description":"Our Low Angle Jack makes a great shooting plane, its low angle blade is perfect to take effortless shavings for joint end grain.\r\n\r\nThe side wall doesn't really make a great comfortable handle so a long while back the No 62 Hot Dog was born.\r\n\r\nWe CNC machine ours from aircraft grade aluminium with a strong powder coat finish.  The stainless steel grub screw has a hard nylon tip to avoid marking the plane side wall when tightened.\r\n\r\nIt allows you to comfortably push down from the centre of the plane as well as keeping it snug against the shooting board side wall.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565042987287,"sku":null,"price":95.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/f6b3fc76-IMG_0223-scaled-1.jpg?v=1774903730"},{"product_id":"ray-iles-spoon-carvers-set","title":"Ray Iles Spoon Carvers Set","description":"This set of three carvers gets you started on the intriguing world of a spoon carver. Using O1 tool steel is just right for this use of fine bladed tool. Nice beech handles finish off the tools. There is a shallow curve, deep curve and a straight blade.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043085591,"sku":null,"price":229.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/c9069b33-IMG_0248-scaled-1.jpg?v=1774903730"},{"product_id":"no-507-rebate-block-plane","title":"No 507 Rebate Block Plane","description":"\u003cstrong\u003eWe are currently out of stock of the No 507, we will advise when they will be available.\u003c\/strong\u003e\r\n\r\nBased on the original dimensions of  the Sargent No 507 this low angle rebate block plane has extra features to make it very versatile with the following applications.\r\n\u003cul\u003e\r\n \t\u003cli\u003eLow Angle block plane with a blade bed angle of 12° for general trimming, end grain work, tenon cheeks and more.\u003c\/li\u003e\r\n \t\u003cli\u003eHas the ability to be fitted with an adjustable fence that fits on either side of the plane to avoid requiring two planes to plane with the grain on either side of the workpiece.\u003c\/li\u003e\r\n \t\u003cli\u003eThe fence is secured by \u003cstrong\u003etwo\u003c\/strong\u003e stainless rods that avoids flex which can occur when only one rod is used. Make straight, flat rebates with ease.\u003c\/li\u003e\r\n \t\u003cli\u003eChamfer plane when the 45° fence is fitted allowing perfect accurate chamfers.\u003c\/li\u003e\r\n \t\u003cli\u003eRaised panel doors etc are easily planed with a 20° fence fitted.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nThe body is sand cast from indestructible ductile iron. The cap iron and fence is in bronze, other parts in brass and marine grade stainless steel. Ground flat \u0026amp; square.\r\nComes standard with a Howard Adjuster for silky smooth blade adjustment. Front knob is Fiddleback Redgum.\r\nNicker blades in PM-10V tool steel to score wood fibres and hence a clean side cut. Nickers are larger (12mm diameter) than others to make it easier to hold the flat of the round nicker blade in place while the hex screw is tightened.\r\n\r\nBlade is superior PM-10V tool steel, 25° bevel, 4mm thick.\r\nLength 170mm (6.8\"), width 46mm (1.8\")\r\nWeight (without fence) 980gms\r\nHex keys included for all adjustments.\r\n\r\nAvailable with or without fence system.\r\n\r\nMade in Adelaide, South Australia.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043020055,"sku":null,"price":429.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/77b6caaa-IMG_0174-scaled-1.jpg?v=1774903734"},{"product_id":"no-507-rebate-block-plane-with-fence-system","title":"No 507 Rebate Block Plane with fence system","description":"Based on the original dimensions of  the Sargent No 507 this low angle rebate block plane has extra features to make it very versatile with the following applications.\r\n\u003cul\u003e\r\n \t\u003cli\u003eLow Angle block plane with a blade bed angle of 12° for general trimming, end grain work, tenon cheeks and more.\u003c\/li\u003e\r\n \t\u003cli\u003eRabbet plane with an adjustable fence that fits on either side of the plane to avoid requiring two planes to plane with the grain on either side of the workpiece.\u003c\/li\u003e\r\n \t\u003cli\u003eThe fence is secured by \u003cstrong\u003etwo\u003c\/strong\u003e stainless rods that avoids flex which can occur when only one rod is used.\u003c\/li\u003e\r\n \t\u003cli\u003eMake straight flat rebates with ease.\u003c\/li\u003e\r\n \t\u003cli\u003eChamfer plane when the 45° fence attachment (purchased separately) is fitted allowing perfect accurate chamfers.\u003c\/li\u003e\r\n \t\u003cli\u003eRaised panel doors etc are easily planed with a 20° fence fitted (purchased separately).\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nThe body is sand cast from indestructible ductile iron. The cap iron and fence is in bronze, other parts in brass and marine grade stainless steel. Ground flat \u0026amp; square.\r\nComes standard with a Howard Adjuster for silky smooth blade adjustment. Front knob is Fiddleback Redgum.\r\nNicker blades in PM-10V tool steel to score wood fibres and hence a clean side cut. Nickers are larger (12mm diameter) than others to make it easier to hold the flat of the round nicker blade in place while the hex screw is tightened.\r\n\r\nBlade is superior PM-10V tool steel, 25° bevel, 4mm thick.\r\nLength 170mm (6.8\"), width 46mm (1.8\")\r\nWeight (without fence) 980 gms,\r\nHex keys included for all adjustments.\r\n\r\nAvailable with or without fence system.\r\n\r\nMade in Australia.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043118359,"sku":null,"price":495.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/39101080-IMG_0175-scaled-1.jpg?v=1774903734"},{"product_id":"fence-system-for-no-507-rebate-block-plane","title":"Fence System for No 507 Rebate Block Plane","description":"This is the fence system to suit our Rebate Block Plane. Cast in Bronze.\r\n\u003cul\u003e\r\n \t\u003cli\u003eRabbet plane with an adjustable fence that fits on either side of the plane to avoid requiring two planes to plane with the grain on either side of the workpiece.\u003c\/li\u003e\r\n \t\u003cli\u003eThe fence is secured by \u003cstrong\u003etwo\u003c\/strong\u003e stainless rods that avoids flex which can occur when only one rod is used.\u003c\/li\u003e\r\n \t\u003cli\u003eMake straight flat rebates with ease.\u003c\/li\u003e\r\n \t\u003cli\u003eMake perfect chamfers with a 45° fence fitted \u003cstrong\u003e(optional extra fence)\u003c\/strong\u003e\n\u003c\/li\u003e\r\n \t\u003cli\u003eRaised panel doors etc are easily planed with a 20° fence fitted \u003cstrong\u003e(optional extra fence.)\u003c\/strong\u003e\n\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nMade in Adelaide.\r\n\r\n[video width=\"720\" height=\"720\" mp4=\"https:\/\/henryeckert.com.au\/wp-content\/uploads\/2020\/04\/Rebate-Block-demo.mp4\"][\/video]\r\n\r\n ","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043151127,"sku":null,"price":89.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/d99c8d12-IMG_0177-scaled-e1684884383218.jpg?v=1774903734"},{"product_id":"no-507-rebate-plane-20-fence","title":"No 507 Rebate Plane 20° Fence","description":"This 20° fence is screwed securely to the plane fence attachment with supplied 2 x stainless screws. Enables the plane to make 20° raised panels.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043183895,"sku":null,"price":39.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/1227cccc-IMG_4500.jpg?v=1774903734"},{"product_id":"honing-guide-kit","title":"Honing Guide Kit","description":"\u003cstrong\u003eWe are currently out of stock of Honing Guides while we develop a new look for our Honing Guide. We expect it available January 2022\u003c\/strong\u003e.\r\n\r\nThis Honing Guide Kit includes our Honing Guide, Extension Jaws, Mortise Chisel Jaws \u0026amp; Angle Setting Jig.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043347735,"sku":null,"price":329.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/63bc165a-IMG_7297.jpg?v=1774903734"},{"product_id":"ray-iles-drawbore-pins","title":"Ray Iles Drawbore Pins","description":"Manufactured by Ray Iles Edge Tools. They are made from EN9 spring steel. As with traditional drawbore pins, the shape is slightly offset (unlike others), for easy removal. 1\/2\" x 9\". Handles are Beech in the Carver pattern. These drawbore pins are very well made, tough and well designed.\r\n\r\nBelow is a quote from Joel @ Tools For Working Wood, talking about drawbore use, what makes a proper drawbore pin \u0026amp; Ray Iles.\r\n\u003cem\u003eThe best way to put together a mortise and tenon is by drawboring them. What this means is that when you drill the holes for a dowel to pin the joint together you offset the hole in the tenon towards the shoulder so that the pin has to bend a little to get the joint together and put a little tension in the joint. Any shrinkage in the stile would be taken up by the tension and the joint is incredibly strong. \u003c\/em\u003e\r\n\r\n\u003cem\u003eThe problem is test fitting it. You can of course just drive dowels into the joint but that means driving them out and replacing them every time you test fit. This is a pain and also wears the joint. The traditional solution is using \u003cspan class=\"searchfound\"\u003edrawbore\u003c\/span\u003e pins. \u003cspan class=\"searchfound\"\u003eDrawbore\u003c\/span\u003e pins not only let you assemble the joint but they have an eccentricity that allows you to tighten up the joint without banging down. It's a technique that is still used today to align steel beams for assembly.\u003c\/em\u003e\r\n\r\n\u003cem\u003eA few years ago I mentioned to Ray Iles that there were no proper \u003cspan class=\"searchfound\"\u003edrawbore\u003c\/span\u003e pins being made on the market and certainly none with the proper eccentricity. He mentioned that he would get antiques in and they would sell very quickly. He took a long look at a bunch and saw the eccentricity that I mentioned and of course he said \"that explains why you don't see hammer marks on them.\" Most of the old ones were used by doormakers and large rigging makers but and they work for cabinetmaking (it's what I have) but smaller sizes can be much easier to handle. \u003c\/em\u003e\r\n\r\n\u003cem\u003eThe way you use them is just put them in a \u003cspan class=\"searchfound\"\u003edrawbore\u003c\/span\u003e hole and wiggle them down. You will notice that on half a turn they seem to tighten up the joint, and on the other half they loosen. Just by turning and wiggling the pin you can get the joint to mechanically tighten up with a lot of pressure. A pin without the offset, is sometimes used but you don't get the pressure on the joint.\u003c\/em\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043249431,"sku":null,"price":189.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/7b70d8a2-IMG_0033-scaled-1.jpg?v=1774903734"},{"product_id":"plane-sock-medium","title":"Plane Sock - Medium","description":"Our plane socks are knitted in the US by a manufacturer that specialises in protective products for firearms, tools, sporting goods. They are environmentally safe, shield against dust and scratches, and have a lifetime guarantee. In addition to that, the unique makeup of their fabric creates a natural wicking ability that prevents rust and other moisture damage like no other protective product on the market.\r\n\r\nThey come in three sizes, Small suits block planes, Medium for No 4, 164 \u0026amp; 4 1\/2 smoothers, Large suits No 62, No 5 \u0026amp; 6 bench planes.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043216663,"sku":null,"price":21.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/374a712c-IMG_0065-scaled-1.jpg?v=1774903734"},{"product_id":"ray-iles-carving-whittling-knife-curved","title":"Ray Iles Carving\/Whittling Knife - Curved","description":"Ray Iles Whittling Knife is made by  Ray Iles Edge Tools. The design has considered the shape and and size of the handle for comfort and control. The blade is made from 01 high carbon tool steel and holds an exceptionally sharp edge. The handle is made from beech and is treated with linseed oil. The handle will require additional coats of linseed oil from time to time to maintain the look and durability of the wood.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043314967,"sku":"CK009-1","price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/437cad21-IMG_0248-768x768-1.jpg?v=1774903734"},{"product_id":"pm-10v-102-plane-blade","title":"PM-10V # 102 plane blade","description":"This PM-10V plane blade is made to suit the HE # 102 Low Angle Bronze Block Plane. At 4.2mm the blade is thicker than normal.\r\n\r\nThe major bevel is ground at 25 degrees.\r\n\r\n\u003cem\u003ePowdered Metallurgy\r\n\u003c\/em\u003e\r\n\r\nPowdered Metallurgy Tool Steel is the new era of tool steel. The steel ‘mix’ contains high vanadium carbides. It comes from a process of melting the constituent metals that make up the steel and then mixing them together. Next, they are atomised to make a powder consisting of minutely small particles.\r\nThe particles are screened to ensure uniformity and then under pressure they are heated to form the tool steel billet.\r\nThis method produces a tool steel that is extremely uniform with a very fine grained structure.\r\nWhat does this mean to the woodworker?\r\nPut simply, this tool steel has higher impact resistance than O1 \u0026amp; A2 tool steel. More importantly it has amazing resistance to abrasion, that is, great wear resistance so your blades stay sharper much longer. Users say over double the time of O1 \u0026amp; A2 steel.\r\nThe blades sharpen easily to a very keen edge. Our blades are machined, carefully heat treated to the manufacturing mill’s specifications in house, triple tempered, surface ground flat and primary bevels prepared for fine honing in Adelaide.Depending on the size, our after market blades are 10% to 30% thicker than most others giving you a more rigid blade resisting chatter and more weight (heft) in the right spot lowering the centre of gravity.\r\n\r\n\u003cem\u003e Technical Powdered Metallurgy Information Page \u003ca href=\"https:\/\/henryeckert.com.au\/powdered-metallurgy-tool-steel-information-page\/\"\u003ehere\u003c\/a\u003e.\u003c\/em\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043282199,"sku":null,"price":79.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/f7ecc384-IMG_0402-1024x1024-600x600-2.jpg?v=1774903734"},{"product_id":"no-65-adjustable-mouth-large-block-plane","title":"No 65 Adjustable Mouth Large Block Plane","description":"The Stanley No 65 was introduced in 1898 and made for 71 years. As quoted by Bryant @ \u003ca href=\"https:\/\/virginiatoolworks.com\"\u003eVirginia Toolworks\u003c\/a\u003e \"Considered one of the best block planes Stanley ever made, the no. 65 is sometimes referred to as the \"Cadillac of block planes\", and, Patrick Leach, Stanley tool guru from \u003ca href=\"http:\/\/www.supertool.com\"\u003eThe Superior Works\u003c\/a\u003e says \"This block plane is one of the finest planes that Stanley ever made.\"\r\n\r\nOur #65 is hand sand cast in manganese bronze, the first of its type ever to be produced.\r\n\r\nIt is 175mm (7\") long, 51mm (2\") wide, with a 42mm (1 5\/8\") PM-10V 4.8mm thick blade. The sole is precision ground flat with accurate 90° side walls also precision ground flat. The bed is CNC machined at 12° to the sole, with the blade having a primary bevel of 25° makes a 37° cutting angle out of the box. Of course, a secondary bevel can be honed to adjust the cutting angle for different planing requirements.\r\nThe adjustable mouth can close up to the blade when taking the finest of shavings or open up when taking coarse rank shavings. It has our proprietary Hand cast Manganese Bronze cap iron. All other fittings are solid brass.\r\nThis is an exception tool, being a low angle block plane it can trim, shape, plane end grain but also be used as a small smoother due to its extra width and length.\r\nThe plane has epic heft weighing 1.25 kg (2 3\/4 lb) making it wonderfully powerful but still very manoeuvrable with ease of use.\r\n\r\nThe No 65 planes beautifully with authority.\r\n\r\nThere is a photo comparing size with the 60 1\/2 block plane.","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043380503,"sku":null,"price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/33ad0bbd-IMG_7130-scaled-1.jpg?v=1774903734"},{"product_id":"no-102-low-angle-small-block-plane","title":"No 102 Low Angle Small Block Plane","description":"The 102 was first made by Stanley in 1877. Our version is hand cast in manganese bronze with straight parallel sides at 90° to the sole for addition use with a shooting board. The cap iron is also manganese bronze. The blade is our PM-10V superior tool steel ground flat with a 25° primary  bevel. It is 32mm wide and a class leading over 4mm thick. The blade sits firmly on a 12° precision machined bed. It is fitted with our exclusive unobtrusive Howard adjuster for silky smooth blade adjustment. Manganese bronze often reveals small casting blemishes on machining, part of the character and not affecting performance in any way.\r\n\r\nThe plane is 135mm long and 41mm wide. It weighs 500 grams.\r\n\r\nA small pocket sized plane with a grand performance.\r\n\r\n ","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043478807,"sku":null,"price":294.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/b2e57457-IMG_4698-scaled-1.jpg?v=1774903734"},{"product_id":"pm-10v-blade-no-65-low-angle-block-plane-40-micro-bevel","title":"PM-10V Blade No 65 Low Angle Block Plane - 40° Micro Bevel","description":"This PM-10V plane blade is made to suit the Henry Eckert No 65 Low Angle Block Plane. At 4.8mm the blade is thicker than normal.\r\n\r\nThe major bevel is ground at 25 degrees, we have installed a \u003cstrong\u003e40° micro bevel\u003c\/strong\u003e to help avoid tear out in cross grained timbers.\r\n\r\n\u003cem\u003ePowdered Metallurgy\r\n\u003c\/em\u003e\r\n\r\nPowdered Metallurgy Tool Steel is the new era of tool steel. The steel ‘mix’ contains high vanadium carbides. It comes from a process of melting the constituent metals that make up the steel and then mixing them together. Next, they are atomised to make a powder consisting of minutely small particles.\r\nThe particles are screened to ensure uniformity and then under pressure they are heated to form the tool steel billet.\r\nThis method produces a tool steel that is extremely uniform with a very fine grained structure.\r\nWhat does this mean to the woodworker?\r\nPut simply, this tool steel has higher impact resistance than O1 \u0026amp; A2 tool steel. More importantly it has amazing resistance to abrasion, that is, great wear resistance so your blades stay sharper much longer. Users say over double the time of O1 \u0026amp; A2 steel.\r\nThe blades sharpen easily to a very keen edge. Our blades are machined, carefully heat treated to the manufacturing mill’s specifications by our metallurgist (Andrew), surface ground flat and primary bevels prepared for fine honing in Adelaide.Depending on the size, our after market blades are 10% to 30% thicker than the originals giving you a more rigid blade resisting chatter and more weight (heft) in the right spot lowering the centre of gravity.\r\n\r\n\u003cem\u003e Technical Powdered Metallurgy Information Page \u003ca href=\"https:\/\/henryeckert.com.au\/powdered-metallurgy-tool-steel-information-page\/\"\u003ehere\u003c\/a\u003e.\u003c\/em\u003e","brand":"Henry Eckert Artisan Handmade","offers":[{"title":"Default Title","offer_id":52565043446039,"sku":null,"price":99.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/files\/12bfd1db-IMG_0400-1024x1024-600x600-1.jpg?v=1774903734"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0994\/6051\/4071\/collections\/IMG_6646-scaled-1-square-6fe1fd44afc0bdae54dc827e96510dcc-8clo02hdiy1n.jpg?v=1775123227","url":"https:\/\/henrysartisan.com.au\/collections\/workshop.oembed","provider":"Henry Eckert","version":"1.0","type":"link"}